BMKYG - AS973 (SP503) BRUSH ON SEALER/ADH, PREP COAT & TEXTILE MED

  • MSDS: BMKYG
  • Manufacturer: DUNCAN ENTERPRISES
  • Product Name: AS973 (SP503) BRUSH ON SEALER/ADH, PREP COAT & TEXTILE MED
  • National Stock Number: 6850-00F021065
Product Identification

Product ID:AS973 (SP503) BRUSH ON SEALER/ADH, PREP COAT & TEXTILE MED
MSDS Date:01/01/1992
FSC:6850
NIIN:00F021065
MSDS Number: BMKYG

Responsible Party
DUNCAN ENTERPRISES
5673 E SHIELDS AVE
FRESNO, CA 93727-7819
US

Emergency Phone: 209-445-1222

Info Phone: 209-291-4444

Preparer: CURT SATHRE

Cage: 21546

Contractor
DUNCAN ENTERPRISES
FRESNO, CA 93727 US

Telephone: 209-291-4444

Cage: 21546

Ingredients

NON-HAZARDOUS FOR INGREDIENTS

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONTOXIC. ABRASIVE CAN SCRATCH EYES.
Explanation of Carcinogenicity:NONE

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:USE APPROPRIATE TECHNIQUES & MEDIA FOR SURROUNDING
FIRE.
Unusual Fire/Explosion Hazard:MATERIAL CAN SPATTER ABOVE 212F. POLYMER
FILM CAN BURN.

Accidental Release

Spill Release Procedures:CLEAN UP PROPERLY W/PAPER TOWELS & WET SPONGE.

Handling

Handling and Storage Precautions:KEEP CONTAINER SEALED.
Other Precautions:DON'T INHALE MIST. AVOID CONTACT W/EYES.

Exposure Controls

Respiratory Protection:IF SPRAYING, DON'T INHALE MIST. USE RESPIRATOR
THAT IS NIOSH APPROVED FOR SPRAYS & MISTS.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
RECOMMENDED WHEN SPRAYING.
Eye Protection:RECOMMENDED
Work Hygienic Practices:GOOD HYGIENE PRACTICES SHOULD BE FOLLOWED.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:212F
Spec Gravity:1.1
Evaporation Rate & Reference:(BU AC = 1): 1
Solubility in Water:INSOLUBLE
Appearance and Odor:OPAQUE-COLORED LATEX PAINT

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPS >212F

Disposal

Waste Disposal Methods:PUT PAPER TOWELS IN TRASH & RINSE OUT SPONGE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.